Best 118 And 135 Drill Bit
Best results for 118 and 135 drill bit
Drill America 29 Piece Heavy Duty High Speed Steel Drill Bit Set with Black and Gold Finish in Round Case (1/16" – 1/2" x 64ths), KFD Series
$61.02
$81.16
Amazon.com
Last update was on: May 18, 2024 4:31 am
- Assortment of 29 jobber length drill bits includes inch sizes 1/16" to 1/2" in 1/64" increments
- High-speed steel (HSS) provides hardness for wear resistance
- Black and gold oxide finish resists corrosion and increases the hardness of the drill bit
- Self-centering 135-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging
- Comes in a plastic storage case
Hurricane M42 Cobalt Drill Bit, 8.00MM, 135 Degree Split Point, Made in the USA
$8.99
$11.60
Amazon.com
Last update was on: May 18, 2024 4:31 am
- M42 Cobalt Steel - 135° Split Point - 2 Flutes, 4 Cutting Edges
- Diameter: 8.00 mm | Overall Length: 117 mm | Flute Length: 75 mm
- Perfect for drilling in acrylic, hardwoods, and all metals
- Will start easily and will not wander
- Faster cutting with less pressure
- Can be easily sharpened, unlike brad point bits
Drill America 5/32" x 6" Cobalt Aircraft Extension Drill Bit, GLBCO Series
$5.66
$8.43
Amazon.com
Last update was on: May 18, 2024 4:31 am
- Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium
- 135° split point tip prevents drill from walking
- Round shanks allow use with a wide variety of tool holding systems
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools
- performance is similar to uncoated tools
- 6" overall length for drilling where extra length for reach is required
Chicago Latrobe 150ASP Series High-Speed Steel Jobber Length Drill Bit Set with Metal Case, Heavy Duty, Black Oxide Finish, 135 Degree Split Point, Inch, 15-piece, 1/16" – 1/2" in 1/32" increments
Drill Doctor DD500X500x Drill Bit Sharpener, Professional Design & Construction for Durability with Industrial-Strength Diamond Sharpening Wheel, Set Point Angles at 118° & 135°, Sharpens 3/32" to 1/2" standard twist bits
Regalo 192-Inch Super Wide Adjustable Baby Gate and Play Yard, 4-In-1, Bonus Kit, Includes 4 Pack of Wall Mounts
$89.99
$102.59
Amazon.com
Last update was on: May 18, 2024 4:31 am
- SUPERWIDE: Fits opens up to 192 inches wide and stands 28 inches tall
- 2-IN-1: Can convert from a super wide gate to an 8-panel play yard. No tools require, quick and easy. Includes 4 pack of wall mounts
- CONFIGURABLE: Each panel can be adjusted to fit almost any opening. Great for wide spaces, angled openings, hallway, doorway, bottom of stairs or barrier. Folds flat for storage
- DURABLE AND CONVENIENT: The all steel design is durable and convenient with a walk-through door
Drill America 3/16" x 6" Cobalt Aircraft Extension Drill Bit (Pack of 12), GLBCO Series
$52.09
$75.01
Amazon.com
Last update was on: May 18, 2024 4:31 am
- Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium
- 135° split point tip prevents drill from walking
- Round shanks allow use with a wide variety of tool holding systems
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools
- performance is similar to uncoated tools
- 6" overall length for drilling where extra length for reach is required
Chicago Latrobe 759 Solid Carbide Short Length Drill Bit, Slow Spiral Flute, Uncoated (Bright) Finish, Round Shank, 135 Degree Split Point, 1/8" Size
$19.30
$22.97
Amazon.com
Last update was on: May 18, 2024 4:31 am
- Short length drill bit offers rigidity to reduce tool deflection and breakage
- Carbide resists wear better than high-speed or cobalt steel and withstands high speeds
- Uncoated (bright) finish is an untreated surface that can be used on a range of materials
- Self-centering 118-degree 4-facet point provides durability and accuracy to prevent walking and penetrate material more easily than a conventional point
Triumph Twist Drill Co. 094148 3/4 Diameter T9FHD High Speed Steel Drill, Black and Bright Finish, 1-Pack
$13.02
$16.01
Amazon.com
Last update was on: May 18, 2024 4:31 am
- High Speed Steel for general purpose drilling in a variety of materials
- Silver and Deming style, 6-Inch overall and 3-Inch of flute length
- 118 -Degree split point to help prevent drill -Inchwalking-Inch
- Made in the U.S.A.
- 1/2-Inch diameter shank with 3 flats on the shank
DRILLFORCE 1/8 inch, HSS Twist Drill Bits,5% Cobalt Jobber Length Twist Drill Bits,10pcs in Plastic Bag, ideal for drilling on mild steel, copper, Aluminum, Zinc alloy etc. (1/8)
$8.99
$12.59
Amazon.com
Last update was on: May 18, 2024 4:31 am
- Cobalt drill bits: Classic 5% Cobalt M35 High Speed Steel construction with Titanium Coating for proven capability and durability.
- Hardness: 5% Cobalt drill bits’ Rock wall Hardness Level HRC 65-66.
- Package & Size: 10 Pieces drill bits in a plastic bag, Diameter 1/8 inch, Total length 2-3/4 inch, Working length 1-5/8 inch.
- Professional & DIY Use: For use on metal, wood & plastics, Stainless Steel, Not For Use On Concrete / Masonry. Perfect match for workshop or service vehicles.
Drillco 1000EF Series High-Speed Steel Reduced-Shank Drill Bit, Black/Gold Oxide Finish, Round Shank with Flats, Spiral Flute, 135 Degree Split Point, 1-1/4" Size
$11.32
$16.75
Amazon.com
Last update was on: May 18, 2024 4:31 am
- Reduced shank drill bit has a shank that is smaller in diameter than its shaft and a shorter length than other reduced-shank bits in larger sizes, permitting portable drilling with a 1/2" drill chuck
- Designed for drilling tough, high-tensile strength materials
- High-speed steel (HSS) provides hardness for wear resistance
- Black and gold oxide finish resists corrosion and increases the hardness of the drill bit for additional wear resistance
Drill America 7/64" x 6" Cobalt Aircraft Extension Drill Bit, GLBCO Series
$4.96
$5.75
Amazon.com
Last update was on: May 18, 2024 4:31 am
- Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium
- 135° split point tip prevents drill from walking
- Round shanks allow use with a wide variety of tool holding systems
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools
- performance is similar to uncoated tools
- 6" overall length for drilling where extra length for reach is required
Century Drill & Tool 26221 Pro Grade Cobalt Drill Bit, 21/64"
$10.69
$12.72
Amazon.com
Last update was on: May 18, 2024 4:31 am
- Designed for drilling in extremely hard materials, including stainless steel
- Cobalt drill bits have a great resistance to heat and friction providing a longer tool life
- Century 135 degree quick-cut points are self-centering and penetrate faster with less pressure
- Cobalt drill bits offer 14 times Life Rating when compared to standard 118 degree point drill bits
3Pcs/Set Drill Bit Angle Gauges Stainless Steel Drill Sharpener Tools S/S Angle Measuring Gage Hand Measure Tools
$8.09
$10.44
Amazon.com
Last update was on: May 18, 2024 4:31 am
- ?This Angle gauge set is made of high quality stainless steel, high hardness, and durable in use
- ?Cutting tool angle is 60 degrees for a tooth-shaped angle 55 degree angle and metric thread, inch thread inspection, blade and special measuring tools for measuring angles
- ?Diameter drill front edge of the protractor 50 gauge 118 ¡ã apex angle of twist drills grinding gauge suitable for 118 ¡ã apex diameter of not more than 50mm of grinding twist drills
Drillco 350N Series High-Speed Steel Nitro Mechanics Length Drill Bit, Black/Gold Oxide Finish, Round with Flats Shank, Spiral Flute, 135 Degree Split Point, 11/64" Size (Pack of 12)
$19.72
$28.79
Amazon.com
Last update was on: May 18, 2024 4:31 am
- Mechanic's length drill bit is slightly shorter than a jobber length drill bit and less prone to deflection when drilling
- Heavy duty nitride surface treatment increases hardness for drilling stainless steel and other hard metals
- High-speed steel (HSS) provides hardness for wear resistance
- Black and gold oxide finish resists corrosion and increases the hardness of the drill bit for additional wear resistance
Chicago Latrobe 559 Cobalt Steel Short Length Drill Bit, Gold Oxide Finish, Round Shank, 135 Degree Split Point, 1/8" Size (Pack of 12)
$29.72
$32.69
Amazon.com
Last update was on: May 18, 2024 4:31 am
- Short length drill bit offers rigidity to reduce tool deflection and breakage
- Cobalt steel provides extended tool life compared to high-speed steel drill bits when drilling hard materials
- Gold oxide finish lubricates and provides wear resistance on ferrous materials
- 135-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging
- Extra-thick web provides increased strength and rigidity compared to standard drill bits
Century Drill and Tool 26218 Cobalt High Speed Steel Drill Bit, 9/32-Inch
$7.78
$10.74
Amazon.com
Last update was on: May 18, 2024 4:31 am
- Designed for drilling in extremely hard materials, including stainless steel
- Cobalt drill bits have a great resistance to heat and friction providing a longer tool life
- Century 135 degree quick-cut points are self-centering and penetrate faster with less pressure
- Cobalt drill bits offer 14 times Life Rating when compared to standard 118 degree point drill bits
Chicago Latrobe 150ASP-TN High-Speed Steel Jobber Length Drill Bit, TiN Coated, Round Shank, 135 Degree Split Point, Letter Size K (Pack of 1)
$6.50
$9.36
Amazon.com
Last update was on: May 18, 2024 4:31 am
- Jobber length drill bit has a midrange drilling depth for general-purpose applications
- High-speed steel (HSS) provides hardness for wear resistance
- Titanium nitride (TiN) coating offers increased wear resistance, extended tool life, and higher hardness on ferrous and nonmetallic materials
- 135-degree split point that penetrates hard material without a pilot hole or 135-degree conventional point for general-purpose drilling applications, depending on diameter size
