Best Bench Grinder Disc Sander
Best results for bench grinder disc sander
BUCKTOOL 4 x 36-Inch Belt and 8-Inch Disc Sander with 3/4Hp Motor
$204.99
$297.24
Last update was on: November 22, 2024 3:02 pm
- [Save 30% on belt and disc when you purchase this machine ! ]Sanding belt and disc were directly driven by motor shaft , maintenance free, you don't have to adjust the belt tension, change damage belt like before
- Motor direct drive design can increase 25% sanding efficiency than the traditional design. Max. developed 3/4 HP total enclosed induction motor supplies silent but powerful output
- Belt can work at 0 or 90 degrees depending on the needs of your project, the driven drum allows for sanding of curved work pieces. Quick sander belt replacement design & humanized track control
WEN 6502T 4.3-Amp 4 x 36 in. Belt and 6 in. Disc Sander with Cast Iron Base
$140.23
$185.10
Last update was on: November 22, 2024 3:02 pm
- Two-in-one sanding machine includes both a 4-by-36 inch belt and a 6-by-6 inch disc
- Belt tilts anywhere from 0 to 90 degrees
- Sturdy cast iron base prevents any heavy vibrations
- 4.3 Amp motor provides up to 3600 RPM
- Tension release lever provides for simple changes between sandpaper grits
RIKON Power Tools 50-151 Belt with 5" Disc Sander, 1" x 30", Blue
JET J-41002 2-Inch by 42-Inch 3/4-Horsepower Bench Belt and 8-Inch Disc Sander
$499.00
$558.88
Last update was on: November 22, 2024 3:02 pm
- Deluxe miter gauge that turns and locks for common angles, 45 degrees both left and right
- Hinged idler wheel cover, tilting table
- Abrasive belt unit does the work of a jig saw, coping saw, or hand file while removing material and finishing
- Allows an operator to get into small openings, plus handle odd shapes and angles
- Grind, sand, or finish large work pieces on the disc unit fast and efficiently, table is slotted to accept miter gauge
Palmgren 2" x 42" Belt, 6" Disc bench finishing machine
BUCKTOOL 4 x 36-Inch Belt and 6-Inch Disc Sander with Portable Al. Base
$149.99
$167.99
Last update was on: November 22, 2024 3:02 pm
- [Save 30% on belt and disc when you purchase belt sander]Sanding belt and disc were directly driven by motor shaft , maintenance free, you don't have to adjust the belt tension, change damage belt like before
- Motor direct drive design can achieve 25% sanding efficiency. Max. developed 3/4HP total enclosed induction motor supplies silent but powerful performance. This Sander meets CSA standards. We give one year warranty. For motor defective, we will replace new machine, spare parts issue will send free parts for repair
Sackorange 60 PCS 5-Inch NO-Hole PSA Aluminum Oxide Sanding Disc, Self Stick(10 Each of 80 100 120 180 240 400)(5 inch)
$14.59
$16.78
Last update was on: November 22, 2024 3:02 pm
- Premium aluminum oxide grain for optimal sanding capacity
- Pressure sensitive adhesive backing and C-weight paper
- Resin on resin bond for heat resistance
- Applicable to furniture, automobiles, yachts and other industries of metal and non-metallic materials of various complex surface rust, paint, deburring, solder joints grinding
- 60 Pack-10 Each of 80 100 120 180 240 400.
MultiTool 36" x 2" Belt Grinding Attachment
$227.75
$286.97
Last update was on: November 22, 2024 3:02 pm
- EFFICIENT: Superior performance and a user-friendly belt change of under 5 seconds produce better quality with less downtime.
- VERSATILITY: Grinding, sanding or polishing in 4 positions on rubber contact wheel, flat paten, disc or free-strapping. The unit can be swiveled vertically or any position in between.
- ACCURATE TRACKING: The running position of the belt is simple to adjust and it stays there, allowing for quality finishing.
1 x 30 Knife Makers Coarse Grit Sanding Belts, 6 Pack Assortment
$25.49
$28.55
Last update was on: November 22, 2024 3:02 pm
- Includes: zirconia P36, P40, P60, P80, P120 grit aluminum oxide P150 grit
- Premium metalworking material was designed for knife makers in mind
- Course grits are best for hogging, grinding and shaping your knife
- Included is upgraded zirconia (24-120g) for a long lasting and sharp cut
- Guaranteed or money back. Hand built in usa by Red Label Abrasives
Grizzly H6070 Belt and 5-Inch Disc Sander, 1 x 30-Inch
WEN 6515T 1 in. x 30 in. Belt Sander with 5 in. Sanding Disc
$81.70
$90.69
Last update was on: November 22, 2024 3:02 pm
- Two-in-one sanding machine includes both a 1-by-30 inch belt and a 5-inch disc
- 2.3A motor provides up to 3160 FPM for the belt and 3450 RPM for the disc
- Sturdy heavy-duty base prevents walking and wobbling during operation
- Features two separate dust ports for maximum vacuuming efficiency
- Includes a miter gauge, an 80-grit sanding disc, a 100-grit sanding belt and a 2-year warranty
RIKON Professional Power Tools 6” x 48” Belt with 10” Disc Sander, 50-122
$424.99
$586.49
Last update was on: November 22, 2024 3:02 pm
- HIGH POWER - This large 1HP motor delivers superior power for driving the sanding belt and disc without stalling.
- BELT AND DISC SANDER - With a 6” x 48” belt and 10” disc this sander from Rikon Tools has the strength and capacity to complete all of the sanding you may need.
- TILTING - The disc table for this sander tilts 0-90 degrees allowing precise sanding of even the sharpest angles.
- ADJUSTABLE - The belt can be adjusted from the horizontal to vertical position for whatever your work needs may be.
WEN 6500 4 x 36-Inch Belt and 6-Inch Disc Sander with Steel Base
$103.91
$144.43
Last update was on: November 22, 2024 3:02 pm
- Two-in-one sanding machine includes both a 4-by-36 inch belt and a 6-by-6 inch disc
- Belt tilts anywhere from 0 to 90 degrees
- Features an open-style steel frame design
- 3.2A motor provides up to 1150 FPM
- Tension release Lever makes for Simple changes to sandpaper grit
POWERTEC BD1502 1" x 30" Belt and 5" Disc Sander
$69.99
$79.79
Last update was on: November 22, 2024 3:02 pm
- Sand, grind, deburr, surface and shape your stock to perfection
- Solid cast-iron base prevents unwanted wobble, vibration and movement
- Two separate dust ports provide tidy, effective dust collection
- A precision miter gauge allows for accurate squaring of stock
- Designed with two beveling tables (one for the belt one for the disc sander)
M-jump 4-Inch x 36-Inch Aluminum Oxide Sanding Belt,12-Pack(2 Each of 60 80 120 150 240 400 Grits)(4x36in)
$22.79
$30.99
Last update was on: November 22, 2024 3:02 pm
- Made with Premium Aluminum Oxide grain.
- It is mainly used for wood / aluminum / non-ferrous metal / glass / plastic / stone ect.
- Antistatic, washable plus an additive in the resin to resist loading.
- Excellent for making both narrow & wide belts.
- 12 pack assortment includes two each 60 / 80 / 120 / 150 / 240 / 400 Grits.
EX ELECTRONIX EXPRESS Mini 1 x 30 Belt Sander 3400 RPM
POWERTEC 110260 6-Inch PSA 100 Grit Aluminum Oxide Adhesive Sanding Disc, 10-Pack
$6.65
$8.91
Last update was on: November 22, 2024 3:02 pm
- Premium aluminum oxide grain for optimal sanding capacity
- Pressure sensitive adhesive backing and C-weight paper
- Resin on resin bond for heat resistance
- Consistent cut and uniform finishes
- Applications: wood / aluminum / non-ferrous metal / plastic / fiberglass/ painted surfaces