Best Drill Tap Size Metric
Best results for drill tap size metric
AUTOTOOLHOME Combination Drill and Tap Bit 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc Set of 6
$11.89
$17.36
Amazon.com
Last update was on: November 24, 2024 5:53 pm
- Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor and time
- Back tapered beyond tap to prevent thread damage from over-drilling
- Deburr/countersink also provided on bit beyond back taper
- Made from hardened high-speed steel (HSS 4341) vs carbon steel for longer life
- Designed to tap up to 10-gauge metal
Huot 12675 Tap and Drill Bit Index for Metric Tap Sizes 2.5 mm x 0.45 mm to 12 mm x 1.75 mm and Metric Drill Bit Sizes 2.05 mm to 10.2 mm
$14.92
$18.50
Amazon.com
Last update was on: November 24, 2024 5:53 pm
- Index holds 18 taps and drill bits in metric tap sizes 2.5 mm x 0.45 mm to 12 mm x 1.75 mm and drill bit sizes 2.05 mm to 10.2 mm
- Labeled storage holes for identification and organization
- Made of steel with an epoxy finish and has a snap-lock cover for durability and protection
- Meets ISO 529 1975 standards
- Made in USA
Nxtop 6pcs Combination 1/4" Hex Twist Tap Drill HSS M3-M10 Bit Screw Countersink Hexagonal Handle Metric Taps White Diamond/Titanium Plated
$13.19
$15.17
Amazon.com
Last update was on: November 24, 2024 5:53 pm
- Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron, etc.
- Fast replacement composite cone, uses drill edged principle.
- Shank Dia: 6.35mm 1/4 Hex Shank
- Material: High speed steel
- Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency.
Greenlee DTAPKIT 6-32 to 1/4-20 6-Piece Combination Drill and Tap Set
Amazon.com
Last update was on: November 24, 2024 5:53 pm
- Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor and time
- Back tapered beyond tap to prevent thread damage from over-drilling
- Deburr/countersink also provided on bit beyond back taper
- Made from hardened high-speed steel vs carbon steel for longer life
- Designed to tap up to 10-gauge metal
Metric M42 8% Cobalt Twist Drill Bits Set for Stainless Steel and Hard Metal (1mm-10mm/19pcs)
$34.89
$44.31
Amazon.com
Last update was on: November 24, 2024 5:53 pm
- Premium M42 8% Cobalt Steel ,68-70 HRC (Rockwell Hardness Scale) ,Usually Give the Best Heat,Wear and Chip Resistance and Long Tool Life.
- 3 Steps Desigh for Cutting through Stainless Steel,Hard Metals,Aluminum,Plastic.
- This Cobalt Drill Bit is Typically Capable of Running Three to Five Times Faster.Despite the Higher Price,the Cost Per Hole When Using Cobalt Drill Bit Will be the Lowest,Since It Can Produce So Many More Holes.
Breynet 6PCS HSS Combination Drill and Tap Bit Set, 1/4 Inch Hex Shank Metric Tap and Drill Combination Bit Set Metric Deburr Countersink Bit + Automatic Spring-Loaded Center Punch Tool Set 5 inch
$12.99
$18.97
Amazon.com
Last update was on: November 24, 2024 5:53 pm
- ▲ Spring-Loaded Center Punch Tool Set for Steel Wood Plastic Window Glass Crushing Hand Tool, Automatic Center Punch Heavy Duty Determine Drilling Position
- ▲ Car Escaping Tool: Center punch is the best tool to final the central point before punching, accurately punch holes in wood, thin steel and plastic, and as an emergency escape tool and window breaker.
- ▲ Tapping Drill Bit Set UNC Size: 6 - 32NC (3.5mm), 8 - 32NC (4.2mm), 10 - 32NC (5mm), 10 - 24NC (5mm), 12 - 24NC ( 5.7mm), 1 / 4 - 20NC (6.35mm)
XT AUTO 6pcs HSS Metric Hex Spiral Flute 2-in1 Combination Drill and Tap Bit Set M3-M10 with 1/4" Hex Shank Set
$9.99
$11.79
Amazon.com
Last update was on: November 24, 2024 5:53 pm
- 6 sizes in one drill and tap bit set (M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1, M8 x 1.25, M10 x 1.5) to meet your diversified requirements
- Drilling, tapping and deburring/countersinking in one, one-step processing, greatly save processing steps and time costs, improve working efficiency.
- Quick change 1/4 Inch (6.35mm) hex shank with metric sizes engraved on the bits. Wide spiral flutes carry the chips out of the hole. Can be used on multi-spindle heads with reversing mechanisms for tapping in most materials
Greenlee DTAPKITM M3-M10 6-Piece Combination Drill and Tap Set
$34.99
$43.74
Amazon.com
Last update was on: November 24, 2024 5:53 pm
- Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor and time
- Back tapered beyond tap to prevent thread damage from over-drilling
- Deburr/countersink also provided on bit beyond back taper
- Made from hardened high-speed steel vs carbon steel for longer life
- Designed to tap up to 10-gauge metal
6 Pcs 1/4" HSS Spiral Hex Shank Combination Drill Screw Tap Bit Set (M3-M10) with Automatic Spring Loaded Center Punch Tool – Gold
$15.99
$18.55
Amazon.com
Last update was on: November 24, 2024 5:53 pm
- Material: HSS (4341) High hardness, rustproof, solid and durable
- Self-centering design: do not need additional center drilling or center punching
- Fast replacement composite cone, uses drill edged principle. Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency.
- Metric: M3x0.5, M4x0.7, M5x0.8, M6x1, M8x1.25, M10x1.5.Shank:1/4 inch (6.35mm) hex shank
Accusize Industrial Tools 18 Pc H.S.S. Tap and Drill Set, Unf in Metal Box, 0001-0050
Migiwata Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bits with Straight Shank Set of 13pcs to Cut Through Hard Metals Such as Stainless Steel and Cast Iron
$13.99
$20.29
Amazon.com
Last update was on: November 24, 2024 5:53 pm
- COBALT STEEL - Manufactured from M35 cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, extremely heat resistant
- for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit.
- NO CENTER PUNCH NEEDED - The 135° Quick-Cut points are self-centering and penetrate quickly with less pressure. Will not "walk" or "wander". Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks. Must be used and operated at proper RPMs for maximum efficiency
IRWIN Tools Hanson Machine Screw/Fractional/Metric Tap and Hex Die and Drill Bit Deluxe Set, 117 Piece 26377
$227.91
$264.38
Amazon.com
Last update was on: November 24, 2024 5:53 pm
- Ideal for rethreading fasteners and fastener holes for auto and machinery repair
- Constructed of high carbon steel for durability
- Puts commonly needed taps, dies, drill bits, and extractors at your fingertips
- Perfect set for the professional craftsman
- Contains 117 of the most commonly needed machine screw plug tap and hex die sizes, drill bits, spiral screw extractors, an adjustable handle tap wrench, 2-in-1 tap wrench, t-handle wrench, pitch gauges, and a plastic case
60-Piece Master Tap and Die Set – Include Both SAE Inch and Metric Sizes, Coarse and Fine Threads | Essential Threading and Rethreading Tool Kit with Complete Accessories and Storage Case
$39.99
$57.19
Amazon.com
Last update was on: November 24, 2024 5:53 pm
- ▲ PREMIUM MATERIAL AND DURABILITY - Industrial grade GCr15 bearing steel construction ensures durability and tool longevity to withstand professional uses
- ▲ EXCELLENT CUTTING PERFORMANCE - All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance
- ▲ VERSATILITY AND TAPERED TEETH DESIGN - Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel
ABN Metric and SAE Standard Tap and Die 60-Piece Rethread Set Rethreading Kit for Cutting External and Internal Threads
$40.99
$50.01
Amazon.com
Last update was on: November 24, 2024 5:53 pm
- CUT AND RENEW THREADS: The ABN Metric and SAE Standard Tap and Die 60-Piece Rethread Set Rethreading Kit for Cutting External and Internal Threads is a comprehensive set for cutting and renewing external and internal threads to exact standards
- SIZES: Metric taps 3x0.5, 4x0.7, 5x0.8, 6x1.0, 7x1.0, 8x1.25, 9x1.25, 10x1.0, 10x1.5, 12x1.75
- UNC taps 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2
Accusize Industrial Tools 18 Pc H.S.S. Tap and Drill Set, U.N.C, 0001-0040
$58.00
$67.28
Amazon.com
Last update was on: November 24, 2024 5:53 pm
- 18 Pcs/Set H.S.S. Tap & Drill Set, UNC
- Size of Taps: 6-32UNC, 8-32UNC, 10-24UNC, 10-32UNF, 1/4"-20UNC, 5/16"-18UNC, 3/8"-16UNC, 7/16"-14UNC, 1/2"-13UNC.
- Size of Drills: #36, #29, #25, #21, #7, F, 5/16", U, 27/64".
- HSS Fully Ground
