Best 2 Inch Drill Bit For Concrete
Best results for 2 inch drill bit for concrete
Hanperal 65mm SDS Plus Shank Hole Saw Cutter Concrete Cement Stone Wall Drill Bit
$18.69
$22.80
Amazon.com
Last update was on: November 23, 2024 4:05 pm
- Made of carbide tipped metal material,very durable.
- Simple operation, easy to use,and fast perforated.
- Used for drilling walls, stones, bricks,or installation of air-conditioning etc.
- SDS plus shank, male thread Adapter,Greatly replace the broken adapter with your drill chuck.
- High-frequency welding technology, welding openings is very strong, smooth inside and outside welding mouth.
Bosch HC5099 Wild Bore Head SDS-max Shank Bit 2 x 18 x 23-Inch
$94.15
$120.51
Amazon.com
Last update was on: November 23, 2024 4:05 pm
- Patented extra strength tip for longer life
- Large flute volume for fast drilling dust transport and less clogging
- Narrow flute back for reduced friction between bit and material
- Creates true round holes for anchors
- Diameter is 2 inches with 16 inches usable length. Total length is 21 inches.
Dry Drill Core Bits for Brick, Concrete Block, Masonry – 2" Diameter 5/8"-11 Threaded #30/40 Diamond Grit
$49.99
$73.49
Amazon.com
Last update was on: November 23, 2024 4:05 pm
- #30/40 diamond grit for drilling soft brick, soft masonry, concrete block
- Diameter: 2 inches
- Thread: 5/8"-11 threaded
- Drilling depth: 9.5"
- High diamond concentration and quality guarantee longer coring life, solid poured concrete Not commended
Dry Core Bit for Brick and Concrete Block with Pilot Bit – 2" Diameter – 1/2" Shank Arbor – #30/40 Diamond
$74.99
$82.49
Amazon.com
Last update was on: November 23, 2024 4:05 pm
- #30/40 diamond grit for drilling soft brick, soft masonry, concrete block
- Diameter: 2 inch - Pilot Bit Includedes
- Thread: 1/2" Shank
- Drilling depth: 9.5"
- High diamond concentration and quality guarantee longer coring life, solid poured concrete Not commended
Concord Blades CBW02000SP 2 Inch Wet Concrete Diamond Core Drill Bit
$43.82
$61.79
Amazon.com
Last update was on: November 23, 2024 4:05 pm
- 10 mm segment height, 3.5mm Segment Width, 1-1/4" -7mm Arbor
- Use Wet Only
- This core bit is used for wet drilling on cured concrete with hard aggregate and medium to heavy steel reinforcement, and asphalt overlay on concrete
- Does not come with a pilot bit
- 14" tube length
2" Core Bits for Granite, Marble, Concrete, Concrete Tile, and Stone Countertops
$28.96
$42.86
Amazon.com
Last update was on: November 23, 2024 4:05 pm
- Designed for drilling granite, marble, concrete, and other hard masonry. Great for faucet mounting holes in stone and concrete countertops
- Can be used dry when water is not an option, but drilling with water will extend the segment life.
- 2" Drill Depth, 8 mm segments
- 5/8"-11 Threaded
- 2 inch
Stadea CBD112N 2 Inch Concrete Core Drill Bit Diamond Hole Saw Bit For Concrete Brick Block Stone Masonry , Laser Welded Wet Dry 1 1/4-7 Thread
$55.99
$61.59
Amazon.com
Last update was on: November 23, 2024 4:05 pm
- 2 Inch Diamond Concrete Core Drill Bit Hole Saw, 14 Inch high Designed for drilling hard Concrete, Rebar, masonry, hard brick, Granite, and other hard materials
- Laser Welded Diamond Segments for extra joint strength needed to cut hard concrete and other hard materials effectively
- 14" High tube length, with 1 1/4"-7 arbor, Fit known brand core drill rigs
- Designed to cut either in wet or dry use, for longer life span use wet
Wet Drill Core Bits for Hard Concrete, Granite, Brick, and Block – 2" Diameter 1-1/4"-7 Threaded #30/40 Diamond Grits
Drilax Heavy Duty Wet and Dry Use 2 inch Diamond Hole Saw Drill Core Bit for Brick, Concrete Block, Masonry 2 inches Depth of Cut – 3/8 inch Standard Shank DrilaxHD010050
$29.99
$35.39
Amazon.com
Last update was on: November 23, 2024 4:05 pm
- PROFESSIONAL HEAVY DUTY - HIGH QUALITY, DURABLE Diamond Coated Holesaw Tool 2 inches Diameter
- DEPTH of CUT : 2 inches STANDARD 3/8 inch Shank Use with and standard electric or battery drill.
- DRY or WET USE - Drilling Holes in Concrete Block, Brick, Stones, Foundations, Tiles, Glass, Fish Tanks, Marble, Granite Countertop, Ceramic, Porcelain
- SAVE OVER 80 Percent for DIY Projects - USe DRILAX Guide for Precision
DAMO 2 inch Dry Wet Diamond Core Drill Bit for Concrete Granite Marble Hole Saw
Stadea CBW110H 2 Inch Concrete Core Drill Bit Diamond Hole Saw For Concrete Brick Block Stone Masonry, Wet 5/8"-11 Threaded 14" High
$48.99
$58.79
Amazon.com
Last update was on: November 23, 2024 4:05 pm
- 2 Inch Diamond Concrete Core Drill Bit Hole Saw, 14 Inch long Designed for drilling Concrete, masonry, brick, stone, and other soft to medium hard materials
- High Frequency Welded Diamond Segments for joint strength needed to cut concrete and other soft to medium hard materials effectively
- 14" High tube length, with 5/8"-11 arbor
- Designed to cut in wet, for longer life span use wet
- 5 Pieces diamond Segments with high diamond concentration. each segment is 10 MM High, 3.5 MM thick and 24 MM wide
Bosch HC8510 2 In. x 12 In. SDS-max Rotary Hammer Core Bit
$103.04
$139.10
Amazon.com
Last update was on: November 23, 2024 4:05 pm
- Wave design transfers energy to bit more effectively for up to 40 percent faster drilling versus previous design
- Carbide-tipped centering bit
- Asymmetrical carbide teeth for faster cutting, longer life
- All-in-one core transmits power directly to the end of the bit
- Maximum core size is 2-5/8 In. deep
Bosch HCK005 5-Piece S4L SDS-plus Rotary Hammer Drill Bit Set
$19.97
$23.56
Amazon.com
Last update was on: November 23, 2024 4:05 pm
- Patent pending 4-flute design for fast dust removal
- Carbide-tipped bit heads are harder, tougher and more resistant to extreme loads for longer tool life
- The set includes one each HC2010 (3/16” X 2” X 4), HC2040 (1/4” X 2” X 4”), HC2041 (1/4” X 4” X 6”), HC2061 (3/8” X 4” X 6’) and HC2081 (1/2” X 4” X 6”)
- Storage case for easy access, organizing and portability
Kingthai 2 Inch Drill Core Bit for Concrete Masonry Diamond Wet Turbo Segment Hole Saw with 1-1/4"-7mm Connector
$57.99
$82.35
Amazon.com
Last update was on: November 23, 2024 4:05 pm
- Valid Lenth: 18"/450 mm, Connector: 1-1/4"-7 thread adapter, 10 mm Segment Height, 3.5 mm Segment Width.
- Laser welded core drill bit: Production with Dr-Fritsch machine.
- Designed for: Concrete, reinforced concrete, masonry blocks, also suitable for asphalt & abrasive materials.
- Main features: Core bits with laser welded segments for wet drilling. Special designed roof segments for very fast cutting and easy-start.
Hanperal 50mm SDS Plus Shank Hole Saw Cutter, Wall Hole Saw Drill Bit for Brick Concrete Cement Stone
$16.50
$19.64
Amazon.com
Last update was on: November 23, 2024 4:05 pm
- -Simple operation, easy to use and fast perforated.
- -This item is made of high quality carbide tipped metal material, durable.
- -The SDS Plus Shank Carbide Tip Hole Saw Drill Bit suitable for drilling walls, stones, bricks or installation of air-conditioning etc, Oil Fume Exhauster and Sewer Pipeline Hole Open ect.
- -Using the Electric Hammer of the impact and rotation function on the wall, hollow brick to operate air conditioning holes, pipe holes and so on.
Drilax™ 10 Pcs Diamond Drill Bit Set Hole Saws for Kitchen, Bathroom, Shower, Faucet Wet Drilling Tool Ceramic, Porcelain Tiles, Glass, Marble, Granite Hole Sizes 1/4", 3/8", 1/2" (0.5 Inch) , 3/4" , 1", 1 1/4", 1 3/8", 1 1/2", 1 3/4", 2"
$39.99
$55.59
Amazon.com
Last update was on: November 23, 2024 4:05 pm
- Diamond Drill Bit Tools 10 pcs Set 1/4, 3/8, 1/2, 3/4, 1, 1 1/4, 1 3/8, 1 1/2, 1 3/4, 2
- Best value set in durable zipper case. Great gift idea for any DIY lover.
- There is no need for a center pilot drill. These tools do not have center pilot drills.
- Diamond Coated Tools will work best if you use water to keep the tools cool. Pleasedo NOT run dry.
- Shank size is 3/8 - suitable for all common electric drillers. Max depth 1 inch.
DAMO 1/2 inch Dry Wet Diamond Core Drill Bit for Concrete Granite Marble Hole Saw
Drilax Heavy Duty Wet and Dry Use 2-1/2 inch Diamond Hole Saw Drill Core Bit for Brick, Concrete Block, Masonry 2 inches Depth of Cut – 3/8 inch Standard Shank DrilaxHD010065
$29.99
$41.39
Amazon.com
Last update was on: November 23, 2024 4:05 pm
- PROFESSIONAL HEAVY DUTY - HIGH QUALITY, DURABLE Diamond Coated Holesaw Tool 2-1/2 inches Diameter
- DEPTH of CUT : 2 inches STANDARD 3/8 inch Shank Use with and standard electric or battery drill.
- DRY or WET USE - Drilling Holes in Concrete Block, Brick, Stones, Foundations, Tiles, Glass, Fish Tanks, Marble, Granite Countertop, Ceramic, Porcelain
- SAVE OVER 80 Percent for DIY Projects - USe DRILAX Guide for Precision
Concord Blades CBD02000HP 2 Inch Laser Welded Dry/Wet Diamond Core Drill Bit
$44.39
$49.27
Amazon.com
Last update was on: November 23, 2024 4:05 pm
- 10 mm segment height, 3.8mm Segment Width, 5/8"-11mm Arbor
- Use Dry/Wet
- This core bit is used for general purpose dry drilling on a variety of soft brick and concrete block using either a Handheld Core Drill or a Core Drill Rig
- Does not come with a pilot bit
- Item is a pearlescent color. It changes between white and silver depending on the lighting
DEWALT DW5438-1/2-Inch by 8-Inch by 10-Inch Rock Carbide SDS Plus Hammer Bit
$8.99
$13.31
Amazon.com
Last update was on: November 23, 2024 4:05 pm
- ROCK CARBIDE Tip for Longer Bit Life
- Elongated Four Flute Helix for Faster Material Removal
- Increased Steel Prevents Breakage
- For use with electric or cordless rotary hammers.
- Used for drilling holes in poured concrete and other masonry up to 1-1/8" diameter
- ROCK CARBIDE tip for longer bit life