Best Belt Disk Sander
Best results for best belt disk sander
Palmgren 2" x 42" Belt, 6" Disc bench finishing machine
JET 708598K JSG-6CS 6-Inch/12-Inch 1-1/2 Horsepower Belt/Disc Sander, 115/230-Volt 1 Phase
$1,499.99
$1,874.99
Last update was on: November 23, 2024 4:17 am
- Belt operates horizontally, vertically, or at any angle in between
- Quick-change belt tension lever
- Two ground cast-iron tilting tables with miter gauge slots
- Features 1-1/2 hp, 1-phase 115/230-volt motor, pre-wired 115-volt, produces 2,500 sfpm
- Comes standard with back stop for horizontal mode, miter gauge, sanding belt, sanding disc, and 4-inch dust chute
New Replacement BELT for Craftsman Disk Sander Model # 137.215360
RIKON Power Tools 50-151 Belt with 5" Disc Sander, 1" x 30", Blue
RIKON Professional Power Tools 6” x 48” Belt with 10” Disc Sander, 50-122
$429.00
$579.15
Last update was on: November 23, 2024 4:17 am
- HIGH POWER - This large 1HP motor delivers superior power for driving the sanding belt and disc without stalling.
- BELT AND DISC SANDER - With a 6” x 48” belt and 10” disc this sander from Rikon Tools has the strength and capacity to complete all of the sanding you may need.
- TILTING - The disc table for this sander tilts 0-90 degrees allowing precise sanding of even the sharpest angles.
- ADJUSTABLE - The belt can be adjusted from the horizontal to vertical position for whatever your work needs may be.
BUCKTOOL 4 x 36-Inch Belt and 6-Inch Disc Sander with Portable Al. Base
$149.99
$184.49
Last update was on: November 23, 2024 4:17 am
- [Save 30% on belt and disc when you purchase belt sander]Sanding belt and disc were directly driven by motor shaft , maintenance free, you don't have to adjust the belt tension, change damage belt like before
- Motor direct drive design can achieve 25% sanding efficiency. Max. developed 3/4HP total enclosed induction motor supplies silent but powerful performance. This Sander meets CSA standards. We give one year warranty. For motor defective, we will replace new machine, spare parts issue will send free parts for repair
JET J-41002 2-Inch by 42-Inch 3/4-Horsepower Bench Belt and 8-Inch Disc Sander
$499.00
$558.88
Last update was on: November 23, 2024 4:17 am
- Deluxe miter gauge that turns and locks for common angles, 45 degrees both left and right
- Hinged idler wheel cover, tilting table
- Abrasive belt unit does the work of a jig saw, coping saw, or hand file while removing material and finishing
- Allows an operator to get into small openings, plus handle odd shapes and angles
- Grind, sand, or finish large work pieces on the disc unit fast and efficiently, table is slotted to accept miter gauge
M-jump 4-Inch x 36-Inch Aluminum Oxide Sanding Belt,12-Pack(2 Each of 60 80 120 150 240 400 Grits)(4x36in)
$21.79
$27.89
Last update was on: November 23, 2024 4:17 am
- Made with Premium Aluminum Oxide grain.
- It is mainly used for wood / aluminum / non-ferrous metal / glass / plastic / stone ect.
- Antistatic, washable plus an additive in the resin to resist loading.
- Excellent for making both narrow & wide belts.
- 12 pack assortment includes two each 60 / 80 / 120 / 150 / 240 / 400 Grits.
Grizzly Industrial G0787-4" x 36" Horizontal/Vertical Belt Sander with 6" Disc
POWERTEC 110260 6-Inch PSA 100 Grit Aluminum Oxide Adhesive Sanding Disc, 10-Pack
$6.65
$9.38
Last update was on: November 23, 2024 4:17 am
- Premium aluminum oxide grain for optimal sanding capacity
- Pressure sensitive adhesive backing and C-weight paper
- Resin on resin bond for heat resistance
- Consistent cut and uniform finishes
- Applications: wood / aluminum / non-ferrous metal / plastic / fiberglass/ painted surfaces
WEN 6500 4 x 36-Inch Belt and 6-Inch Disc Sander with Steel Base
$103.91
$121.57
Last update was on: November 23, 2024 4:17 am
- Two-in-one sanding machine includes both a 4-by-36 inch belt and a 6-by-6 inch disc
- Belt tilts anywhere from 0 to 90 degrees
- Features an open-style steel frame design
- 3.2A motor provides up to 1150 FPM
- Tension release Lever makes for Simple changes to sandpaper grit
Cleaning Eraser Stick for Abrasive Sanding Belts, 2" x 2" x 11-7/8" – Natural Rubber Eraser for Cleaning Sandpaper, Rough Tape, Skateboard Shoes and Sanding Discs
$14.99
$20.24
Last update was on: November 23, 2024 4:17 am
- Increase the life of your sanding belts and discs! The Belt Cleaner Stick Rubber Eraser for Cleaning Sander, Shoe, Skateboard extends the life of a belt and disc as it cleans your sander without damaging the grit. Watch your sander come back to life as this cleaner stick is just like seeing pencil on paper just being wiped away with an eraser.
- Simple to use:) Simply hold stick against a moving abrasive belt or disc to remove the loaded particles and debris.
Grizzly Industrial G1014ZX – 6" x 48" Belt/9" Disc Combo Sander with Cabinet Stand
BUCKTOOL 4 x 36-Inch Belt and 8-Inch Disc Sander with 3/4Hp Motor
$204.99
$233.69
Last update was on: November 23, 2024 4:17 am
- [Save 30% on belt and disc when you purchase this machine ! ]Sanding belt and disc were directly driven by motor shaft , maintenance free, you don't have to adjust the belt tension, change damage belt like before
- Motor direct drive design can increase 25% sanding efficiency than the traditional design. Max. developed 3/4 HP total enclosed induction motor supplies silent but powerful output
- Belt can work at 0 or 90 degrees depending on the needs of your project, the driven drum allows for sanding of curved work pieces. Quick sander belt replacement design & humanized track control
POWERTEC BD1502 1" x 30" Belt and 5" Disc Sander
$69.99
$86.09
Last update was on: November 23, 2024 4:17 am
- Sand, grind, deburr, surface and shape your stock to perfection
- Solid cast-iron base prevents unwanted wobble, vibration and movement
- Two separate dust ports provide tidy, effective dust collection
- A precision miter gauge allows for accurate squaring of stock
- Designed with two beveling tables (one for the belt one for the disc sander)
Grizzly H6070 Belt and 5-Inch Disc Sander, 1 x 30-Inch
WEN 6515T 1 in. x 30 in. Belt Sander with 5 in. Sanding Disc
$81.69
$94.76
Last update was on: November 23, 2024 4:17 am
- Two-in-one sanding machine includes both a 1-by-30 inch belt and a 5-inch disc
- 2.3A motor provides up to 3160 FPM for the belt and 3450 RPM for the disc
- Sturdy heavy-duty base prevents walking and wobbling during operation
- Features two separate dust ports for maximum vacuuming efficiency
- Includes a miter gauge, an 80-grit sanding disc, a 100-grit sanding belt and a 2-year warranty
WEN 6508 6 x 48 in. Belt and 9 in. Disc Sander with Stand
$391.06
$531.84
Last update was on: November 23, 2024 4:17 am
- 9 Amp motor provides up to 3450 RPM
- Two-in-one sanding machine includes both a 6-by-48 inch belt and a 9-by-9 inch disc
- Heavy-duty body prevents any heavy vibrations
- Tension release lever makes for simple changes to sandpaper belt grits
- Includes an 80-grit sanding disc, an 80-grit sanding belt, a miter gauge, two dust ports and an open frame stand