Best Watts 1 2 Vacuum Breaker
Best results for watts 1 2 vacuum breaker
Watts 0887701 Bonnet Assembly Repair Kit
$24.99
$34.99
Last update was on: November 24, 2024 9:48 pm
- Bonnet Assembly Kit Consist of: Bonnet Bonnet 'O'-ring Vent spring Hood & hood screws
- It consists of bronze body construction, a silicone rubber check valve disc, and a plastic check valve seat
- This pressure vacuum breaker prevents the reverse flow of polluted water from entering into the potable water supply due to back siphonage
WATTS BRASS & TUBULAR LFN36-M1 1/2 Water Relief Valve, 1/2-Inch
Watts 1-1/2" 009M2 Backflow Preventer Reduced Pressure Zone Assembly RPZ 1 1/2 009M2-QT 0062921 62921
$524.99
$650.99
Last update was on: November 24, 2024 9:48 pm
- Single access cover and modular check construction for ease of maintenance.
- No special tools required for servicing.
- Ball valve test cocks.
- Quarter-turn, full port, resilient seated, bronze ball valve shut-offs and renewable seats.
- Does not conform to Lead Free act. For non-potable use only (irrigation, fire sprinklers, etc).
Watts 0887726 800M4 1/2" & 3/4" Freeze Resistant Retrofit Kit
Febco 905211 Bonnet repair
Watts 0887710 Vent Repair Kit
Watts Brass & Tubular #9D-M3 1/2 1/2" Backflow Preventer
$53.79
$75.84
Last update was on: November 24, 2024 9:48 pm
- 1/2" female pipe thread union inlet x 1/2" female pipe thread union outlet
- With intermediate atmospheric vent
- Typically installed on boiler feed lines to prevent backflow caused by back siphonage or back pressure
- For systems without antifreeze
- Rust inhibitors or other chemicals which will contaminate the potable water system
2-ft 12/3 Heavy Duty 3-Outlet Lighted SJTW Indoor-Outdoor ETL Extension Cord by Watt’s Wire – Short Yellow 2′ 12-Gauge Rugged Lighted Grounded 12-AWG 15-Amp Three-Prong Power-Cord
$11.48
$15.61
Last update was on: November 24, 2024 9:48 pm
- Watts Wire's Grounded 12-Gauge (12/3) 2-foot Multi-Outlet Lighted w/ Ground Extension Cords are the perfect cord all around. Our cords are designed around the contractor and perfect for the hobbyist.
- Our heavy-duty power cords are made with an SJTW thermoplastic which is suitable to temperatures from -40°F to 130°F. Our double jacketed cords won't mar walls or floors but will stand up to concrete!