The Best Range Rover Welcome Led Lights For Door

This listing is for pair of amazing door step courtesy laser projector Shadow lights for Land Range Rover Sport 2008 Discover

We highly recommend you double check whether this kind of lamps fit your car first before buying this product.

Features
Made with high quality cree chip

Power consumption: 3w

Material: ABS+Aluminum alloy

Built-in CAN-bus controller, complete no onboard computer error

Just taked out the your old light and insert this product without change wires or drill hole.

Low power consumption.

Fitment
This auction features one pair Error Free door step courtesy laser projector Shadow lights for Land Rover listed below: (*This LED Light only can use for Land Rover-CAR, 4 Doors needs two sets.*)

Range Rover III

Discovery III and IV

LR3

LR4

If you car haven’t light,please don’t purchase,it can’t install.

If you still are not sure whether an item fits your car or not, please feel free to ask us by sending us a message. It’s our pleasure to answer your question.

Package included: 2 pcs Logo Shadow Lights = 1pair.
Installation
Note: Installation manual not included. Requires professional installation to ensure proper function.

All of our products are designed for easy DIY installation & direct replacement. If LED bulb doesn’t light up after installation, please simply re-insert it oppositely (because LED bulb has polarity like a battery).

Specification:

1) Voltage: DC12V

2) Power: 5W/pcs

3) Material: Aluminum Alloy & Plastic

4) Color Temperature: 7000K

5) Working Temperature: -40 to +150 Centigrade

6) Net Weight: 38g/Pcs

Fit for

Compatibility
Land Rover
Range Rover (2007 to 2015)
LR2 (2008 to 2013)
LR3 (2010 to 2014)
LR4 (2010 to 2014)
Land Rover Evoque 2013Top Rank
LAND ROVER Freelander 2 （2010–2014）

Package Includes:

2* Logo Door Lights.

Features:
Material: PP
Power: 5W
Working Voltage: 12V
Operating Temperature：-40°C ~ 70°C
Quantity: 2 pcs

Installation Instructions:

Firstly, use a flathead screwdriver or installation tool to remove and disconnect original door step lights.
Secondly, plug in new door lights with correspondent connector.
Finally, put new door lights to the spot where your original step lights were.

For the real projection, please refer to the sixth image.
This welcome lights is installed into the under surface of the car doors. When the door is opened, the logo light is powered on and will be projecting onto the ground. When you close the door, the logo light disappears.

The lights can be compatible with LandRover car only:
Range Rover (2007 to 2016)
LR2 (2008 to 2016)
LR3 (2010 to 2016)
LR4 (2010 to 2016)
Land Rover Evoque 2013 Top Rank
LAND ROVER Freelander 2 （2010–2016）
Attention please:
1. For above car models, before making order, please check whether your original car door light can be powered or not? If there is no power supply for your original door light, this items can’t fit your car. Because even for the same model, some general configuration hasn’t power supply for the door lights, only its deluxe configuration has power supply for the door lights.
2. For some cars, because of the position of the door lights, the light projection is hitting the door when it is opened, and therefore, only a part of projecting appears on the ground. If you mind it, please don’t buy. Thanks for your understand.

Specification:
Current: 0.15MA
Input Power: 5W
Color Temp: 6500K
Voltage: DC 12/24V
Material: PVC
Chip: CREE

How to replace car door light(Installation Instructions):
1. Use A Flathead Screwdriver to Remove and Disconnect Original Door Step Lights;
2. Plug in New Door Lights with Correspondent Connector;
3. Put new Door Lights to The Spot Where Your Original Lights Were;
4. Done! Logo Should Be Projected on The Ground.

Package include:
Door light*2

Express your passion for Land Rover with our Land Rover Wireless LED Laser Car Door Logo Lights to Turbo-charge your car doors with Brilliant Light-emitting properties and dynamic contrast.

Be Bold Anywhere. Be Captivating Anytime.

Features
100% brand new
Voltage: 12V
Output power: 10W
Material: ABS + Aluminum alloy
Quantity: 4 Lamps (2 Pair)
Features: Installed Simply, Good Looking and Utility
High Brightness LED, Power Consumptions Savage

Note: Please confirm your car model and year before purchasing. 

COMPATIBLE FOR:
For Land Rover Range Rover (2010 – 2020)
For Land Rover Evoque 2013 Top Rank
For Land Rover Freelander 2（2010–2020）
For Land Rover Discovery 3&4（2010-2020）
For Land Rover Range Rover Executive Edition(2007-2020)

How to replace car door light (Installation Instructions):
1. Use a Flathead Screwdriver to Remove and Disconnect Original Door Step Lights;
2. Plug In new Door Lights with Correspondent Connector;
3. Put new Door Lights to the Spot Where Your Original Lights Were;
4. Done! Logo Should Be Projected on The Ground.

Notes:
If you cannot confirm whether these lights are compatible with your car model or some installation problems, you can contact us at first!
Helpful and Supportable Customer Service for You All The Time.

Color:Range rover light
1.Easy to install–Direct Replacement.No modifications required.No wire cutting.
2.Package Included: 2 x Land Rover Logo Lights （Not applicable if the car does not have original door lights.）
3.Clear bright laser LED car lights with welcome logo emblem projection for Land Rover- Fashion light & shade visual experience for You!

How to replace car door light(Installation Instructions):
1. Use A Flathead Screwdriver to Remove and Disconnect Original Door Step Lights;
2. Plug in New Door Lights with Correspondent Connector;
3. Put new Door Lights to The Spot Where Your Original Lights Were;
4. Done! Logo Should Be Projected on The Ground.
Notes: If you cannot confirm whether these lights are compatible with your car model or some installation problems, you can contact us at first!

Product Advantages:

Aluminum back cover,Better heat dissipation,Long life-span.

Aluminum back cover,Stronger,More Durable.

Our back cover is aluminium alloy, Most is plastic with poor quality in the market.

Specification:
Input Power: 5w (each LED bulb) Voltage:DC 12/24v
Working Temperature:-40℃-105℃
Lower Power Consumption
How to replace car door light(Installation Instructions):

Use A Flathead Screwdriver to Remove and Disconnect Original Door Step Lights;

Plug in New Door Lights with Correspondent Connector;

Put new Door Lights to The Spot Where Your Original Lights Were;

Done! Logo Should Be Projected on The Ground.

Brand new and high quality
Easily to install it yourself with the 3M adhesive sticker, no more troubles of making holes.
Avoid to get off car on bad road, such as water marsh land. Auto light up with the door opening.
Environmental, high power, high efficient, energy saving, no pollution, no noise, no electronic interface.
Lighting steady and constant, clear and soft.
Size:62*67*14mm
Power Supply: 3x AAA battery
Install Instruction:
1. Install instruction about the batteries: Put 3 pcs AAA(1.5V) batteries in the battery case and install them according to the positive & negative as marked in the case. Then close the batteries case.
2. Install instruction of the shadow light: Stick the Magnet on the bottom of the car frame. Stick the car light on the car door. The distance between the Magnet & Car light is about 10mm. When you close the car door, the Magnet is at the under face of the sensor on the car logo light.
3. Automatic Control & Manual Control: When you open the door, the logo will be shown on the ground, and it will turn off automatically after 2 minutes. If you want the light on/off, just need to press the button on the head of the light. One set includes 2 pcs, suggest you buy 2 sets for 4 doors of your car!
Package includes:
2 x Ghost Shadow Car Door LED Welcome Laser Projector Decoration Logo Light

Specification:
Type: Car Door Welcome light
Material: ABS
Quantity: 2pcs
Item Color: Black
LED Color Temperature: 6000K
Power Supply: 3*AAA battery (Not Included)
Working Temperature: -40℃ to +105℃
Size: 2.6*2.5*0.8″ (L*W*H)
Net Weight: 75g / 2.6oz

Package Included:
2* Welcome Light (Include 2* Magnet Plate and 4* sticker)

Installation Instruction
1 ) Adjust the position of the car light and distance between the magnet and the car light;
2) Gently stick the logo light on the door, stick the magnet on the threshold, we suggest that you
close the door when install;
3) When the light separates with the magnet, it will turn on automatically. After adjusted the
position well, stick the light and the magnet tightly;

Fit for Compatibility
Land Rover
Range Rover (2007 to 2020)
LR2 (2008 to 2019)
LR3 (2010 to 2019)
LR4 (2010 to 2019)
LAND ROVER Freelander 2 （2010–2019）
Range Rover Sport (2010-2020)

Installation Instructions:
Firstly, use a flathead screwdriver or installation tool to remove and disconnect original door step lights.
Secondly, plug in new door lights with correspondent connector.
Finally, put new door lights to the spot where your original step lights were.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Range Rover Welcome Led Lights For Door, eg:

• What are Top 10 Range Rover Welcome Led Lights For Door for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Range Rover Welcome Led Lights For Door to buy?
• What are Top Rated Range Rover Welcome Led Lights For Door to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Range Rover Welcome Led Lights For Door?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Range Rover Welcome Led Lights For Door.
• Before deciding to buy any Range Rover Welcome Led Lights For Door, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Range Rover Welcome Led Lights For Door and What you should consider when buying the Range Rover Welcome Led Lights For Door and Where to Buy or Purchase the Range Rover Welcome Led Lights For Door. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Range Rover Welcome Led Lights For Door of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Range Rover Welcome Led Lights For Door.