The Inteli-Power 9100 Series is the 12 volt converter/charger of choice by leading manufacturers. These solid-state converter/chargers deliver filtered DC power to all 12 volt lighting and appliance circuits providing safe and reliable service. Reverse battery protection protects converters from damage resulting from improper (reverse) battery lead connection while electronic current limiting automatically reduces output voltage when maximum capacity is reached, protecting your investment. High voltage protection protects the converter from spikes or surge of voltage over 135V. Low line voltage protection automatically shuts converter down if input voltage is insufficient and protects appliances from damaging low voltage irregularities. Variable speed intelligent cooling fan automatically monitors converter temperature and activates fan at speed required. Very slow quiet speeds are used when demand is low such as during sleeping hours. Automatic thermal protection reduces converter output to safe levels when unit temperature exceeds pre-set limits and protects converter from damage due to excessive heat. Equipped with 15 Amp electrical cord. Input: 105-130 VAC, 50/60 Hz, 500 Watts. Output: 13.6 VDC, 30 Amp. Dimensions: 8.25″ L x 7.25″ W x 4.7″ H. Weight: 4 lbs.

High quality engineering is the hallmark of IOTA, and the DLS series is no exception; their exceptionally clean DC output protects your equipment and ensures you get perfect results every time you power up.

The DLS-30 provides 400 watts at 30 amps, and is great for use with a high power charger, or for charging lead-acid batteries directly!

Specifications

• Output power: 30A continuous, 400W
• Output voltage: 13.6/14.2V DC (switchable)
• Input voltage: 108-132V AC
• AC power cord: Integrated
• Warranty: 2 years
• Weight: 2300g
• Dimensions (LxWxD): 246x170x86mm

The Inteli-Power 4000 Series is the industry’s smallest all-in-one 45 or 60 Amp distribution panel/converter system. The AC distribution panel is rated for 120VAC @ 30 Amps with up to 7 branch circuits. The DC section has 12 branch fuse holders, two wired to accommodate 30 Amp fuses, ten more with a maximum rating up to 20 Amps each, all wire tail connections. Panel Dimensions: 12.28″ W x 8.875″ H x 7.25″ D. Coutout Size: 10.75″ W x 7.25″ H. Weight: 6.2 lbs.

The PD9270, 70 amp power converter is designed to provide reliable filtered DC power to all recreational vehicle 12-volt lighting and appliance circuits. The PD9270 converter also provides safe and rapid recharging of RV batteries. Built-in features such as electronic current limiting, reverse battery protection, high voltage protection, low voltage operation, and over temperature shut down ensure long term reliability. The built-in Charge Wizard is a microprocessor-controlled system that constantly monitors the battery voltage and ensures a rapid; yet, safe, recharge. The Charge Wizard can select one of three charging voltages and one of four operating modes depending on the condition and use of the battery. Remote Pendant Not Included, Not In Retail Packaging sold as OE, Full Manufacturer Warranty.

2-Channel K-Series Speaker Cable to RCA Adapter with Line Out Converter

The Scosche LOC80 2-channel adapter line output converter allows you to connect a receiver with no preamp outputs to an amplifier without speaker-level inputs. The LOC80 handles a speaker-level signal up to 80 watts RMS per channel, then converts it to a line-level signal you can plug into your amp’s input. This speaker wire to RCA converter is compatible with high power car stereos up to 80 watts per channel. Perfect for fast installation when adding a subwoofer to your factory car stereo system for a new sound experience.

Pyle Model : PLVHL60

2-Ch. Speaker to RCA Converter

2 Channel Speaker to RCA Converter

This Pyle Link line out converter takes a takes a low-level input and converts it to a high-level input and converts it to a high-level RCA output. Adjust the levels using the built-in control. Ground loop isolation and noise elimination smoothes out your signal for output to an amplifier. Aluminum housing keeps your equipment safe. Max input 50 W.

Add an amplifier to nearly any radio with the KISLOC2 Stereo Line-Out Converter. Experience true sonic accuracy at any volume level with all the sparkling highs and thunderous lows of your original audio. KISLOC2 Stereo Line-Output Converter Unlike traditional LOCs the KISLOC2 is designed without inductors to deliver a completely flat frequency response at all volume levels. Using nothing more than your factory speaker wires the innovative KISLOC2 automatically converts the speaker signal into both an RCA signal and a powerful 100 milli-amp 12-volt remote wire using DC offset. Powerful enough to turn on multiple amplifiers the 12-volt remote wire delivers plenty of power without hunting for a switched 12-volt power source. Accepts up to 55 watts (16 volts) of input signal Fully compatible with standard radios and most smart radios* Delivers up to an 8-volt output signal Flat 20Hz-20kHz frequency range at all volume levels Includes a powerful 100 milli-amp remote turn-on wire. No 12V power source needed! LED indicator for DC offset turn-on *Amplifier output of smart radio must have 60 impedance or lower. What’s in the Box 46KISLOC2 line output converter Owner’s manual Specifications Accepts up to 55 watts (16 volts) of input signal Fully compatible with standard radios and most smart radios* Delivers up to an 8-volt output signal Flat 20Hz-20kHz frequency range at all volume levels Includes a powerful 100 milli-amp remote turn-on wire. No 12V power source needed! LED indicator for DC offset turn-on

When your vehicle does not readily provide an electrical connection for hooking up your trailer, CURT electrical converts offer the solution. Working tail lights on your trailer are absolutely essential any time you tow, and a converter provides an effective way to properly equip your vehicle for safe towing. A CURT electrical converter, much like our custom vehicle-to-trailer wiring harnesses, provides a trailer connector on your vehicle by slicing into the vehicle’s electrical system. Electrical converters are designed to splice directly into the taillight wiring, rather than plugging into various sockets, giving them the nickname “taillight converters”. Though it requires a little extra work compared to a custom wiring harness, a tail light converter offers a reliable, long-term connector solution. This CURT electrical converter is designed to convert a 3-wire system to a 2-wire system and provides a standard 4-way flat connector socket to plug in your trailer. This converter is made with cutting-edge surface-mount technology (SMT) circuitry, featuring electrical components that are mounted directly to the surface of the board rather than being inserted into a series of holes. SMT circuits have longer life cycles, lower resistance, reduced heat generation and are more reliable than through-hole-mounted components.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Wide Range Input Energy Converter, eg:

• What are Top 10 Wide Range Input Energy Converter for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Wide Range Input Energy Converter to buy?
• What are Top Rated Wide Range Input Energy Converter to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Wide Range Input Energy Converter?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Wide Range Input Energy Converter.
• Before deciding to buy any Wide Range Input Energy Converter, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Wide Range Input Energy Converter and What you should consider when buying the Wide Range Input Energy Converter and Where to Buy or Purchase the Wide Range Input Energy Converter. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Wide Range Input Energy Converter of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Wide Range Input Energy Converter.