Best Hss Jobber Drill Bit
Best results for hss jobber drill bit
12 PCS,1/4", HSS Black and Gold Coated Twist Drill Bits, Metal drill, ideal for drilling on mild steel, copper, Aluminum, Zinc alloy etc. Pack in Plastic Bag
$19.99
$22.79
Amazon.com
Last update was on: November 22, 2024 3:59 am
- Bright finish: Classic M2 High Speed Steel construction with Bright Finish for proven capability and durability.
- Strength & Hardness: Made with HSS M2 steel, Rock wall Hardness Level HRC 62-63.
- Package & Size: 12 Pieces in a plastic bag, Diameter 5/16 inch, Total length 4-1/2 inch, Working length 3-3/16 inch.
- Professional & DIY Use: For use on metal, wood & plastics. Not For Use On Concrete / Masonry / Stainless Steel. Perfect match for workshop or service vehicles.
3/16-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12
$19.76
$21.93
Amazon.com
Last update was on: November 22, 2024 3:59 am
- JOBBER LENGTH: 3/16-Inch cutting diameter, 2-5/16-Inch flute length, 3-1/2-Inch overall length, 135 degree split point, 3-flat shank
- MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits
- CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits
Drill America 29 Piece Heavy Duty High Speed Steel Drill Bit Set with Black and Gold Finish in Round Case (1/16" – 1/2" x 64ths), KFD Series
$61.02
$73.83
Amazon.com
Last update was on: November 22, 2024 3:59 am
- Assortment of 29 jobber length drill bits includes inch sizes 1/16" to 1/2" in 1/64" increments
- High-speed steel (HSS) provides hardness for wear resistance
- Black and gold oxide finish resists corrosion and increases the hardness of the drill bit
- Self-centering 135-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging
- Comes in a plastic storage case
Migiwata 13mm MetricTwist Drill Bit Set of 2pcs – Jobber Length Fully Ground Straight Shank – 5% Cobalt M35 Grade HSS-CO, Extremely Heat Resistant – Perfect for Stainless Steel Cast Iron
$18.99
$27.92
Amazon.com
Last update was on: November 22, 2024 3:59 am
- COBALT STEEL - Manufactured from M35 grade cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, ideal for repeated drilling in metalworking.
- FOR STAINLESS STEEL - Particularly successful in cutting through hard metals such as stainless steel and cast iron, although they can be used for softer materials, too. Not for heat treated steel / hardened steel / high carbon steel. Please try to adjust the RPM when it fails to penetrate. Suggested RPM is 250.
Best Choice 8-Piece 1/2” Shank Silver and Deming Drill Bit Set in Aluminum Carry Case, High Speed Steel (HSS) | SAE Size 9/16” – 1” by 1/16th Increment
$26.99
$38.06
Amazon.com
Last update was on: November 22, 2024 3:59 am
- Premium cobalt high speed steel construction for proven capability and durability to drill holes in wood, plastic, aluminum, copper, stainless, sheet metals and many other types of materials
- Superior gold titanium and black nitride dual coating finish holds up lubricant better for smoother drilling, and is 80% more durable and corrosion resistant than regular black enamel finish
- 135° Split point design at tip increases cutting speed with self-centering feature and prevents drill walking or wobbling
DRILLFORCE (10 Pcs) 1/4in. x 4 in. HSS COBALT Drill Bits, Jobber Length, Straight Shank, Metal Drill,Ideal For Drilling On Mild Steel, Copper, Aluminum, Zinc Alloy Etc.
$17.99
$25.19
Amazon.com
Last update was on: November 22, 2024 3:59 am
- Cobalt drill bits: Classic 5% Cobalt M35 High Speed Steel construction with Titanium Coating for proven capability and durability.
- Hardness: 5% Cobalt drill bits’ Rock wall Hardness Level HRC 65-66.
- Package & Size: 10 Pieces drill bits in a plastic bag, Diameter 1/4 inch, Total length 4 inch, Working length 2-3/4 inch.
- Professional & DIY Use: For use on metal, wood & plastics, Stainless Steel, Not For Use On Concrete / Masonry. Perfect match for workshop or service vehicles.
1/4" M35 Cobalt HSS Jobber Length Twist Drill Bit with Straight Shank,Heavy Duty, Pack of 10 PCS, Drilling for Cast Iron, Heat-treated Steel, Stainless Steel and Other Hard Materials
$19.99
$27.99
Amazon.com
Last update was on: November 22, 2024 3:59 am
- Product Information: 10 drill bits: Each kit contains a total of ten drill bits in the same size
- Accurate and Neat: 135°Quick-Cut points are self-centering and penetrate quickly with less pressure. Will not "walk" or "wander"
- Excellent Performance: Bits are extremely heat resistant. Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks
DRILLFORCE HSS General Purpose Heavy Duty Cobalt Jobber Length Twist Drill Bits Size 1/16 with 10pcs in Plastic Bag, ideal for drilling on mild steel, copper, Aluminum, Zinc alloy etc.
$7.89
$11.36
Amazon.com
Last update was on: November 22, 2024 3:59 am
- 10pcs HSS Cobalt Jobber Length Twist Drill bit in Plastic bag with Lables with Size 1/16"
- High Quality Material- High Speed Steel Cobalt -M 35 Cobalt Steel Best Material.
- High Efficiency In Drilling Metals, and Stainless Steel.
- Ideal for drilling in tough metal, including heavy-duty abrasive alloy metal drilling on hardened steel
- 135-degree split-point tip starts drilling immediately with less force and eliminates "walking" across the work surface
IRWIN Tools 63124 3/8-Inch Cobalt 135-Degree Jobber Length Drill Bit, Pack of 6
$28.87
$38.69
Amazon.com
Last update was on: November 22, 2024 3:59 am
- Jobber drill bits made with M-35 Cobalt steel
- Cobalt steel helps dissipate heat for longer life
- Construction for Durability in abrasive materials
- 135-Degree Split Point Tip for reduced bit walking
- Straight shank works in both keyed and key-less drill chucks
Vermont American 10195 7/64-Inch HSS Jobber Drill Bit, 2-Pack
$5.94
$8.73
Amazon.com
Last update was on: November 22, 2024 3:59 am
- For drilling in wood, metal and plastic. Each high speed steel bit is hardened and tempered for long life and high performance in tough applications
- 118 Degree point configuration is ideal for general purpose drilling applications
- 3/8-Inch reduced shank allows for drilling larger holes with 3/8-Inch drills
Champion Cutting Tool Brute Platinum Twister-XL5 29 Piece 1/16"-1/2" x 64ths HSS Jobber Drill Bit Set-135 Deg Split Point, Water Resistant Index-MADE IN USA
$84.99
$121.54
Amazon.com
Last update was on: November 22, 2024 3:59 am
- Drill 3x Longer (than competitors drills), Drill 2x Faster (than cobalt), Drill Accurate (135 deg split point, tapered web geometry)
- Better than cobalt-XL5 is able to flex when cobalt drills chip or snap
- Premium high speed steel and NOMO surface treatment for longer tool life, fast penetration, and flexibility
- Self centering 135 degree split point prevents drill from walking
- Ultimate workhorse for drilling steel, stainless steel, titanium alloys and other hard to drill materials
Hymnorq 1/8 Inch Fractional Jobber Twist Drill Bit Set of 10pcs, Heat Resistant M35 Cobalt Steel, Fully Ground and Straight Shank, Suitable for Repeated Drilling in Iron and Stainless Steel
$11.89
$15.58
Amazon.com
Last update was on: November 22, 2024 3:59 am
- HSS-CO MATERIAL - Manufactured from M35 grade cobalt steel, 5% cobalt added to creates a hardened alloy, for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit.
- 135° SPLIT POINT - the 135° quick-cut split point are self-centering and able to penetrate metals quickly with less pressure, prevent bits from "walking and wanding". Easy cutting without need of center punch.
COMOWARE Cobalt Drill Bit Set- 115Pcs M35 High Speed Steel Twist Jobber Length for Hardened Metal, Stainless Steel, Cast Iron and Wood Plastic with Metal Indexed Storage Case, 1/16" – 1/2"
$179.99
$266.39
Amazon.com
Last update was on: November 22, 2024 3:59 am
- 115 PIECES INCLUDED: 29pcs Fractional Size:1/16” to 1/2” in 1/64th increments
- 26pcs Letter Size: A To Z
- 60pcs Numbered Size: #1 To #60.
- HSS WITH 5% COBALT: Durable, Higher Heat & Abrasion Resistance.
- PRECISE 135° SPLIT POINT & TWIST DESIGN: Prevent walking, clear chips and particles faster.
- PROFESSIONAL & WIDELY USE: M35 Cobalt HSS is more suitable for hardened material. Particularly successful in cutting through hard metals such as stainless steel, cast iron, high temperature alloy, titanium alloy, hard plastics and woods, and also can be used for softer materials.
Pack of 12, 9/64-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel
$16.08
$20.90
Amazon.com
Last update was on: November 22, 2024 3:59 am
- JOBBER LENGTH: 9/64-Inch cutting diameter, 1-3/4-Inch flute length, 2-7/8-Inch overall length, 135 degree split point, straight shank
- MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits
- CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits
DRILLFORCE HSS Jobber Length 10 PCS,7/32" x 3-3/4"Titanium Coated Twist Drill Bits, Metal drill, ideal for drilling on mild steel, copper, Aluminum, Zinc alloy etc. Pack In Plastic Bag (7/32)
$10.95
$12.26
Amazon.com
Last update was on: November 22, 2024 3:59 am
- eed Steel construction with Titanium Coating for proven capability and durability.Titanium Coated: Classic 4241 High Sp
- Strength & Hardness: Made with HSS 4241 steel, Rock wall Hardness Level HRC 60-62.
- Package & Size: 10 Pieces in a plastic bag, Diameter 7/32 inch, Total length 3-3/4 inch, Working length 2-1/2 inch.
- Professional & DIY Use: For use on metal, wood & plastics, Not For Use On Concrete / Masonry / Stainless Steel. Perfect match for workshop or service vehicles.
MaxTool 29 Piece Jobber Length Twist Drill Bit Set High Speed Steel M2; 135 DEG Split Point Fully-Ground; JBS02H10R029P
$62.43
$73.04
Amazon.com
Last update was on: November 22, 2024 3:59 am
- 29pcs jobber length drill bits includes inch sizes 1/16" to 1/2" in 1/64" increments
- Quality High Speed Steel M2 provides all drills long tool life
- Precision fully ground ensures chips moving smoothly, ultimate accuracy and performace
- Black and golden surface finish resists corrosion and increases the hardness of the drill bits
- 135-degree split point prevents "Walking", reduce logging, and penetrates hard material without a pilot hole
MaxTool 29 Piece Twist Jobber Length Drill Bit Set; High Speed Steel HSS M2; 135° Split Point; Fully-Ground; Bright 3-Flat on Shank; JBS02W13R029P
$56.53
$72.92
Amazon.com
Last update was on: November 22, 2024 3:59 am
- 29pcs jobber length drill bits includes inch sizes 1/16" to 1/2" in 1/64" increments
- Quality High Speed Steel M2 provides all drills long tool life
- Precision fully ground ensures chips moving smoothly, ultimate accuracy and performace
- 3-Flat on shank prevents "Spinning" in chucks and maximizes security for precise holes
- 135-degree split point prevents "Walking", reduce logging, and penetrates hard material without a pilot hole
Pack of 12, 3/16-Inch Titanium Nitride Coated Drill Bit, High Speed Steel, Jobber Length, for Metal, Plastic, Wood
$17.96
$23.89
Amazon.com
Last update was on: November 22, 2024 3:59 am
- JOBBER LENGTH: 3/16-Inch cutting diameter, 2-5/16-Inch flute length, 3-1/2-Inch overall length, 135 degree split point, 3-flat shank
- MADE FROM PREMIUM HIGH-SPEED STEEL: peform better because of its well-balanced toughness
- TITANIUM NITRIDE COATING: add lubricity and hardness, enhancing chip flow, finish hole quality and drill life
- APPLICATION: offer best durability and speed for repetitive drilling in medium and softer materials, soft metal, PVC and wood
1/8-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12
$15.05
$17.61
Amazon.com
Last update was on: November 22, 2024 3:59 am
- JOBBER LENGTH: 1/8-Inch cutting diameter, 1-5/8-Inch flute length, 2-3/4-Inch overall length, 135 degree split point, straight shank
- MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits
- CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits
HSS M2 Metal Jobber Twist Drill Bits, Pack of 10 (19/64", 7.5mm)
$19.49
$21.63
Amazon.com
Last update was on: November 22, 2024 3:59 am
- It is typical steel grade of W-Mo common High Speed Steel. With high red hardness and toughness, which is economical and affordable
- The head of drill bit has special sharpening edge and high hardness.
- Excellent machining performance for drilling workpieces.
- Increase productivity and reduce the processing cost of unit holes.
- Smooth and Sharp slot.
