Best Jet Disk Belt Sander
Best results for jet disk belt sander
JET J-41002 2-Inch by 42-Inch 3/4-Horsepower Bench Belt and 8-Inch Disc Sander
$499.00
$673.65
Last update was on: December 12, 2024 7:55 am
- Deluxe miter gauge that turns and locks for common angles, 45 degrees both left and right
- Hinged idler wheel cover, tilting table
- Abrasive belt unit does the work of a jig saw, coping saw, or hand file while removing material and finishing
- Allows an operator to get into small openings, plus handle odd shapes and angles
- Grind, sand, or finish large work pieces on the disc unit fast and efficiently, table is slotted to accept miter gauge
BUCKTOOL 4 x 36-Inch Belt and 8-Inch Disc Sander with 3/4Hp Motor
$204.99
$268.54
Last update was on: December 12, 2024 7:55 am
- [Save 30% on belt and disc when you purchase this machine ! ]Sanding belt and disc were directly driven by motor shaft , maintenance free, you don't have to adjust the belt tension, change damage belt like before
- Motor direct drive design can increase 25% sanding efficiency than the traditional design. Max. developed 3/4 HP total enclosed induction motor supplies silent but powerful output
- Belt can work at 0 or 90 degrees depending on the needs of your project, the driven drum allows for sanding of curved work pieces. Quick sander belt replacement design & humanized track control
BUCKTOOL 4 x 36-Inch Belt and 6-Inch Disc Sander with Portable Al. Base
$149.99
$188.99
Last update was on: December 12, 2024 7:55 am
- [Save 30% on belt and disc when you purchase belt sander]Sanding belt and disc were directly driven by motor shaft , maintenance free, you don't have to adjust the belt tension, change damage belt like before
- Motor direct drive design can achieve 25% sanding efficiency. Max. developed 3/4HP total enclosed induction motor supplies silent but powerful performance. This Sander meets CSA standards. We give one year warranty. For motor defective, we will replace new machine, spare parts issue will send free parts for repair
WEN 6515 1 in. x 30 in. Belt Sander with 5 in. Sanding Disc
$83.16
$103.12
Last update was on: December 12, 2024 7:55 am
- Two-in-one sanding machine includes both a 1-by-30 inch belt and a 5-inch disc
- 2.3A motor provides up to 3160 FPM for the belt and 3450 RPM for the disc
- Sturdy heavy-duty base prevents walking and wobbling during operation
- Features two separate dust ports for maximum vacuuming efficiency
- Includes a miter gauge, an 80-grit sanding disc, a 100-grit sanding belt and a 2-year warranty
KASTFORCE KF6004 4 x 36-Inch Belt and 8-Inch Disc Sander with 3/4Hp Motor
$189.99
$208.99
Last update was on: December 12, 2024 7:55 am
- Belt and disc directly driven by motor shaft , maintenance free, no need adjusting the belt tension, change damage belt like before
- Motor direct drive design supplies 25% more sanding efficiency. Max. developed 3/4 HP total enclosed induction motor supplies silent but powerful output
- Belt works at 0 or 90 degrees depending on customer needs, driven drum allows sanding of curved work pieces. Quick sanding belt replacement design & humanized track control
POWERTEC 110118 4 x 36 Inch Sanding Belts | Aluminum Oxide Sanding Belt Assortment, 3 Each of 60 80 120 150 240 400 Grits | Premium Sandpaper for Belt Disc Sander – 18 Pack
$27.99
$38.91
Last update was on: December 12, 2024 7:55 am
- USAGE: Works with an assortment of belt disc sanding machines and applications – providing a heavy duty stripping and sanding tool for wood, aluminum, fiberglass, rubber, plastic and non-ferrous metals
- PREMIUM GRADE: Made with our superior X-Weight clothed backing, an open coat aluminum oxide grain, and an impressive resin on resin bond that ensures long lasting performance
- CRAFTSMANSHIP: These 4”x36” sanding belts feature a heat and moisture resistant material, and were designed with expertly crafted seams that won’t break under pressure
WEN 6508 6 x 48 in. Belt and 9 in. Disc Sander with Stand
$391.06
$574.86
Last update was on: December 12, 2024 7:55 am
- 9 Amp motor provides up to 3450 RPM
- Two-in-one sanding machine includes both a 6-by-48 inch belt and a 9-by-9 inch disc
- Heavy-duty body prevents any heavy vibrations
- Tension release lever makes for simple changes to sandpaper belt grits
- Includes an 80-grit sanding disc, an 80-grit sanding belt, a miter gauge, two dust ports and an open frame stand
Proxxon 37060 Disc Sander TG 125/E
$220.00
$266.20
Last update was on: December 12, 2024 7:55 am
- Table can be adjusted to incline 50 degrees downward and 10 degrees upward, with miter gage and c-clamp for horizontal and vertical clamping
- Comes with c-clamp to quickly and securely fasten sander to workbench either vertically or horizontally
- Comes with 2 each 5 inch adhesive sanding discs 80, 150 and 240 grit which can be easily removed after use
- Includes an adapter to attach a vacuum cleaner for dust free working
DCT Abrasive Sanding Belt Cleaner Stick, 8.5” Inch Long – Natural Rubber Eraser for Cleaning Sander, Shoe, Skateboard
$11.99
$16.31
Last update was on: December 12, 2024 7:55 am
- INCREASE LIFE OF SANDER: The DCT Abrasive Sanding Belt Cleaner Stick, 8.5” Inch Long – Natural Rubber Eraser for Cleaning Sander, Shoe, Skateboard extends the life of a belt and disc as it cleans your sander without damaging the grit
- Watch your sander come back to life as this cleaner stick is just like seeing pencil on paper just being wiped away with a giant eraser
- For cleaning purposes only
JET 708598K JSG-6CS 6-Inch/12-Inch 1-1/2 Horsepower Belt/Disc Sander, 115/230-Volt 1 Phase
$1,499.99
$2,084.99
Last update was on: December 12, 2024 7:55 am
- Belt operates horizontally, vertically, or at any angle in between
- Quick-change belt tension lever
- Two ground cast-iron tilting tables with miter gauge slots
- Features 1-1/2 hp, 1-phase 115/230-volt motor, pre-wired 115-volt, produces 2,500 sfpm
- Comes standard with back stop for horizontal mode, miter gauge, sanding belt, sanding disc, and 4-inch dust chute
RIKON Power Tools 50-151 Belt with 5" Disc Sander, 1" x 30", Blue
RIKON Professional Power Tools 6” x 48” Belt with 10” Disc Sander, 50-122
$424.99
$531.24
Last update was on: December 12, 2024 7:55 am
- HIGH POWER - This large 1HP motor delivers superior power for driving the sanding belt and disc without stalling.
- BELT AND DISC SANDER - With a 6” x 48” belt and 10” disc this sander from Rikon Tools has the strength and capacity to complete all of the sanding you may need.
- TILTING - The disc table for this sander tilts 0-90 degrees allowing precise sanding of even the sharpest angles.
- ADJUSTABLE - The belt can be adjusted from the horizontal to vertical position for whatever your work needs may be.
POWERTEC BD1502 1" x 30" Belt and 5" Disc Sander
$69.99
$95.89
Last update was on: December 12, 2024 7:55 am
- Sand, grind, deburr, surface and shape your stock to perfection
- Solid cast-iron base prevents unwanted wobble, vibration and movement
- Two separate dust ports provide tidy, effective dust collection
- A precision miter gauge allows for accurate squaring of stock
- Designed with two beveling tables (one for the belt one for the disc sander)
Craftsman 3/4 hp 6" x 9" Belt/Disc Sander
MultiTool 36" x 2" Belt Grinding Attachment
$227.75
$293.80
Last update was on: December 12, 2024 7:55 am
- EFFICIENT: Superior performance and a user-friendly belt change of under 5 seconds produce better quality with less downtime.
- VERSATILITY: Grinding, sanding or polishing in 4 positions on rubber contact wheel, flat paten, disc or free-strapping. The unit can be swiveled vertically or any position in between.
- ACCURATE TRACKING: The running position of the belt is simple to adjust and it stays there, allowing for quality finishing.
DCT Abrasive Belt Cleaner – 4.5in Belt and Disc Sander Abrasive Cleaning Stick, Belt Sander Cleaner Block
$7.99
$10.95
Last update was on: December 12, 2024 7:55 am
- INCREASE LIFE OF YOUR BELT SANDER BELTS: Metal, wood, and glues can clog up your abrasive belts making them wear faster, cut slower, run hotter, and need replacement sooner
- Extend the life of your abrasive materials by using the DCT Abrasive Sanding Belt Cleaner Stick, 4.5” Inch Long – Natural Rubber Eraser for Cleaning Sander, Shoe, Skateboard to remove debris and residue without damaging the grit
814002-1 Belt Compatible for Sears Craftsman Disc Sander Toothed Belt Replacement Parts by Swess
$9.59
$12.28
Last update was on: December 12, 2024 7:55 am
- ★ 140XL Belt, Replaces Sears 113226424 Sander Replacement Belt 814002-1
- ★ Comaptible with Sears Craftsman belt & disc sander Replace 113.226424, 113.226421, 113.2246423, 113.226430, 113.22642
- ★ Dimensions of this item: 14 inch belt length, 70 teeth, 140XL
- ★ High quality: The replacement part is made from durable high quality material and well-tested by the manufacturer
- ★ Guarantee: If you're not completely satisfied, you can ask for a replacement or refund.
WEN HB3216 7-Amp 3-by-21-Inch Variable Speed Combination Handheld and Benchtop Belt Sander
$47.55
$69.90
Last update was on: December 12, 2024 7:55 am
- 7-amp variable speed motor rotates the belt anywhere from 787 to 1312 feet per minute
- Easily attaches to your favorite benchtop for an upward facing stationary belt sander
- Lock-on power switch allows for continuous sanding without requiring a constant grip on the trigger
- Includes a dust collection chamber, a dust port adapter, a dust port reducer, two benchtop clamps, and 80-grit sandpaper
- Backed by a two-year warranty
WEN 65812 12-Inch Benchtop Disc Sander with Miter Gauge and Dust Collection System
$199.38
$237.26
Last update was on: December 12, 2024 7:55 am
- Powerful 8-amp direct-drive motor creates up to 1725 disc rotations per minute
- Onboard 2-inch dust port allows for attachment to the included 2.5-inch dust hose
- Features a beveling 15.5-by-5-inch work table and a sliding miter gauge for maximum versatility
- Spacious 12-inch 60-grit adhesive-backed sanding disc perfect for heavy duty material removal
- Backed by a two-year warranty